Guest
|
 Posted:
Fri Dec 23, 2005 9:37 am Post subject:
Encountered error re-running domainprep |
|
|
Hello,
I'm looking for assistance in determining an error I encountered while
running Exchange 2003 domainprep. The reason for running domain prep
is the real root of my problem which is that I have been unable to
connect a brand new installation of Outlook 2003, running on Windows
XP, to a mailbox on my Exchange 2003 server. While trying to create an
Outlook profile, I encounter an error indicating that Outlook could not
log on. One solution recommended to solve this problem was to run
domainprep again; such is why I have been trying that.
I have attempted several times to run domainprep but each time I
encounter the error found in the following setup log fragment, which is
the very last section of the most recent attempt. Note that I have
replaced my actual domain name with "domain".
[01:15:23] ***** RETRYING THE FAILED OPERATION *****
[01:15:23] Beginning DomainPrep of Domain-level permissions
sub-component
[01:15:23] Entering CBaseServiceAtom(Domain-level
permissions)::ScRemove
[01:15:23] Entering CBaseServiceAtom(Domain-level
permissions)::ScStopAtomServices
[01:15:23] Leaving CBaseServiceAtom(Domain-level
permissions)::ScStopAtomServices
[01:15:23] Entering CBaseAtom(Domain-level permissions)::ScRemove
[01:15:23] Entering CBaseAtom(Domain-level
permissions)::ScRemoveRegistryKeys
[01:15:23] Removing registry entries for Domain-level permissions
[01:15:23] Leaving CBaseAtom(Domain-level
permissions)::ScRemoveRegistryKeys
[01:15:23] Removing Active Directory objects for Domain-level
permissions
[01:15:23] Entering CBaseAtom(Domain-level
permissions)::ScRemoveShortcuts
[01:15:23] Leaving CBaseAtom(Domain-level
permissions)::ScRemoveShortcuts
[01:15:23] Removing IIS Metabase objects for Domain-level permissions
[01:15:23] Leaving CBaseAtom(Domain-level permissions)::ScRemove
[01:15:23] Entering CBaseServiceAtom(Domain-level
permissions)::ScDeleteAtomServices
[01:15:23] Leaving CBaseServiceAtom(Domain-level
permissions)::ScDeleteAtomServices
[01:15:23] Leaving CBaseServiceAtom(Domain-level permissions)::ScRemove
[01:15:23] Entering CAtomPermissions::ScAddDSObjects
[01:15:23] Creating Active Directory objects for Domain-level
permissions
[01:15:23] Creating Exchange groups in the current domain
[01:15:23] Entering ScCreateExchangeServerGroups
[01:15:23] Creating server groups
[01:15:24] Entering ScGetExchangeServerGroups
[01:15:24] Getting DOB for group 0
[01:15:24] Getting string GUID for group 0
[01:15:24] Getting string SID for group 0
[01:15:24] Getting DOB for group 1
[01:15:24] Getting string GUID for group 1
[01:15:24] Getting string SID for group 1
[01:15:24] Leaving ScGetExchangeServerGroups
[01:15:24] Leaving ScCreateExchangeServerGroups
[01:15:24] Configuring initial permissions
[01:15:24] Entering ScSetPermissionsOnDomain
[01:15:24] Initializing CExtendedRight array
[01:15:24] Initializing CPropertySet array
[01:15:24] Initializing CTrustee array
[01:15:34] CAce::ScGetGuidForDoc
(f:\titanium\admin\src\libs\logic\security2.cxx:2092)
Error code 0XC0072038 (8248): The result set is too large.
[01:15:34] CAce::ScInit
(f:\titanium\admin\src\libs\logic\security2.cxx:1934)
Error code 0XC0072038 (8248): The result set is too large.
[01:15:40] Setting ACL on domain container
[01:15:53] CAce::ScInit
(f:\titanium\admin\src\libs\logic\security2.cxx:1979)
Error code 0XC0072038 (8248): The result set is too large.
[01:15:53] CAce::ScInitArray
(f:\titanium\admin\src\libs\logic\security2.cxx:2508)
Error code 0XC0072038 (8248): The result set is too large.
[01:15:53] CExSecurityDescriptor::ScAddAces
(f:\titanium\admin\src\libs\logic\security2.cxx:4461)
Error code 0XC0072038 (8248): The result set is too large.
[01:15:53] CExSecurityDescriptor::ScAddAcesToDob
(f:\titanium\admin\src\libs\logic\security2.cxx:4492)
Error code 0XC0072038 (8248): The result set is too large.
[01:15:53] === IGNORING PREVIOUS ERRORS === ScSetPermissionsOnDomain
while adding rights for inetOrgPerson. RUS may not be able to update
inetOrgPerson objects.
(f:\titanium\admin\src\libs\exsetup\dsmisc.cxx:655)
The operation has completed successfully.
[01:15:53] Setting ACL on proxy container
[01:15:57] Setting ACL on AdminSDHolder container
[01:16:01] Allowing Exchange Enterprise Servers to read SACLs in this
domain
[01:16:01] Leaving ScSetPermissionsOnDomain
[01:16:01] Entering ScSetPermissionsOnExchangeServerGroups
[01:16:01] Reading list of full admins from org
[01:16:01] Entering ScGetListOfOrgLevelFullAdmins
[01:16:01] Creating DOB for Org object
[01:16:01] Reading datMSEXCH_ADMINS array
[01:16:01] Looking for full admins
[01:16:01] Adding account S-1-5-21-1547161642-706699826-1343024091-500
to full admin list
[01:16:01] Leaving ScGetListOfOrgLevelFullAdmins
[01:16:01] Initializing CTrustee from SID
S-1-5-21-1547161642-706699826-1343024091-500
[01:16:02] Granting DS_AM_FULL_CONTROL on groups to
domain\administrator
[01:16:02] Granting Enterprise Servers group FULL CONTROL of both
groups
[01:16:02] Adding ACEs to Enterprise Servers DOB
[01:16:08] Adding ACEs to Domain Servers DOB
[01:16:11] Leaving ScSetPermissionsOnExchangeServerGroups
[01:16:11] Entering ScAddEDSAndSetPermissionsOnPreW2KCompatGroup
[01:16:11] Adding EDS group to Pre-W2K group
[01:16:12] Granting EES group permissions on Pre-W2K group
[01:16:13] Executing LDAP search "(sAMAccountName=Pre-Windows 2000
Compatible Access)"
[01:16:13] Writing permissions on object
"/dc=org/dc=domain/cn=Builtin/cn=Pre-Windows 2000 Compatible Access"
[01:16:19] Leaving ScAddEDSAndSetPermissionsOnPreW2KCompatGroup
[01:16:19] Entering ScSetPasswordOnSystemMailboxAccounts
[01:16:19] Searching for System Mailbox accounts
[01:16:19] Setting password on object "/dc=org/dc=domain/cn=Microsoft
Exchange System
Objects/cn=SystemMailbox{453F057E-6A76-4066-BC37-AC63EF9EE936}"...
[01:16:19] Getting IADsUser interface for
"LDAP://ss1.domain.org:389/cn=SystemMailbox{453F057E-6A76-4066-BC37-AC63EF9EE936},cn=Microsoft
Exchange System Objects,dc=domain,dc=org"
[01:16:19] Generating random password
[01:16:19] Setting password on account
[01:16:19] ScSetPasswordOnSystemMailboxAccounts
(f:\titanium\admin\src\libs\exsetup\dsmisc.cxx:1146)
Error code 0X80070035 (53): The network path was not found.
[01:16:19] Leaving ScSetPasswordOnSystemMailboxAccounts
[01:16:19] CAtomPermissions::ScAddDSObjects
(f:\titanium\admin\src\udog\exsetdata\components\domprep\a_permissions.cxx:150)
Error code 0X80070035 (53): The network path was not found.
[01:16:19] Leaving CAtomPermissions::ScAddDSObjects
[01:16:19] mode = 'DomainPrep' (61966) CBaseAtom::ScSetup
(f:\titanium\admin\src\udog\setupbase\basecomp\baseatom.cxx:842)
Error code 0X80070035 (53): The network path was not found.
[01:18:34] >>>>>>>>>> Setup encountered a fatal error during Microsoft
Exchange Domain Preparation of DomainPrep component task. -- ID:62237
-- CBaseComponent::ScSetup
(f:\titanium\admin\src\udog\setupbase\basecomp\basecomp.cxx:1401)
Error code 0X80070035 (53): The network path was not found.
[01:18:34] Entering ScQueueWatsonErrorReport
[01:19:05] Leaving ScQueueWatsonErrorReport
[01:19:05] Entering
CBaseComponent::SetSubtreeComponentsToFailWithErrorInSetup
[01:19:05] Leaving
CBaseComponent::SetSubtreeComponentsToFailWithErrorInSetup
[01:19:05] CBaseComponent::ScSetup
(f:\titanium\admin\src\udog\setupbase\basecomp\basecomp.cxx:1487)
Error code 0X80070035 (53): The network path was not found.
[01:19:05] Leaving CBaseComponent::ScSetup
[01:19:05] CCompDomainPrep::ScSetup
(f:\titanium\admin\src\udog\exsetdata\components\domprep\compdomprep.cxx:519)
Error code 0X80070035 (53): The network path was not found.
[01:19:05] Leaving CCompDomainPrep::ScSetup
[01:19:05] CComExchSetupComponent::Install
(f:\titanium\admin\src\udog\bo\comboifaces.cxx:829)
Error code 0X80070035 (53): The network path was not found.
[01:19:05] Entering ScQueueWatsonErrorReport
Environment details: Exchange Server 2003 in Native mode (upgraded from
5.5 -> 2000 -> 2003) running on Windows 2000 Server SP4 with all recent
patches via Windows Update. Single forest/domain and DNS on a single
Windows 2000 server SP4 with all recent patches via Windows Update.
Any suggested guidance is much appreciated. Thank you, Maurice
|
|
Jonathan Norris
Guest
|
| Posted:
Sat Dec 24, 2005 11:56 pm Post subject:
RE: Encountered error re-running domainprep |
|
|
Have you tried a different media disk? It almost looks like it is trying to
find files that aren't there or damaged.
Also you may try running policytest.exe against your domain which is on the
Exchange 2003 Media and also can be downloaded as part of the All In One
Tools for Exchange. This will check to see if you have the correct
permissions to run \DomainPrep make sure you use the same UserID that you are
using to run DomainPrep.
--
Jonathan
No Warrenties Implied, Did you do a FULL backup today??????
"maurice_santor@hotmail.com" wrote:
| Quote: | Hello,
I'm looking for assistance in determining an error I encountered while
running Exchange 2003 domainprep. The reason for running domain prep
is the real root of my problem which is that I have been unable to
connect a brand new installation of Outlook 2003, running on Windows
XP, to a mailbox on my Exchange 2003 server. While trying to create an
Outlook profile, I encounter an error indicating that Outlook could not
log on. One solution recommended to solve this problem was to run
domainprep again; such is why I have been trying that.
I have attempted several times to run domainprep but each time I
encounter the error found in the following setup log fragment, which is
the very last section of the most recent attempt. Note that I have
replaced my actual domain name with "domain".
[01:15:23] ***** RETRYING THE FAILED OPERATION *****
[01:15:23] Beginning DomainPrep of Domain-level permissions
sub-component
[01:15:23] Entering CBaseServiceAtom(Domain-level
permissions)::ScRemove
[01:15:23] Entering CBaseServiceAtom(Domain-level
permissions)::ScStopAtomServices
[01:15:23] Leaving CBaseServiceAtom(Domain-level
permissions)::ScStopAtomServices
[01:15:23] Entering CBaseAtom(Domain-level permissions)::ScRemove
[01:15:23] Entering CBaseAtom(Domain-level
permissions)::ScRemoveRegistryKeys
[01:15:23] Removing registry entries for Domain-level permissions
[01:15:23] Leaving CBaseAtom(Domain-level
permissions)::ScRemoveRegistryKeys
[01:15:23] Removing Active Directory objects for Domain-level
permissions
[01:15:23] Entering CBaseAtom(Domain-level
permissions)::ScRemoveShortcuts
[01:15:23] Leaving CBaseAtom(Domain-level
permissions)::ScRemoveShortcuts
[01:15:23] Removing IIS Metabase objects for Domain-level permissions
[01:15:23] Leaving CBaseAtom(Domain-level permissions)::ScRemove
[01:15:23] Entering CBaseServiceAtom(Domain-level
permissions)::ScDeleteAtomServices
[01:15:23] Leaving CBaseServiceAtom(Domain-level
permissions)::ScDeleteAtomServices
[01:15:23] Leaving CBaseServiceAtom(Domain-level permissions)::ScRemove
[01:15:23] Entering CAtomPermissions::ScAddDSObjects
[01:15:23] Creating Active Directory objects for Domain-level
permissions
[01:15:23] Creating Exchange groups in the current domain
[01:15:23] Entering ScCreateExchangeServerGroups
[01:15:23] Creating server groups
[01:15:24] Entering ScGetExchangeServerGroups
[01:15:24] Getting DOB for group 0
[01:15:24] Getting string GUID for group 0
[01:15:24] Getting string SID for group 0
[01:15:24] Getting DOB for group 1
[01:15:24] Getting string GUID for group 1
[01:15:24] Getting string SID for group 1
[01:15:24] Leaving ScGetExchangeServerGroups
[01:15:24] Leaving ScCreateExchangeServerGroups
[01:15:24] Configuring initial permissions
[01:15:24] Entering ScSetPermissionsOnDomain
[01:15:24] Initializing CExtendedRight array
[01:15:24] Initializing CPropertySet array
[01:15:24] Initializing CTrustee array
[01:15:34] CAce::ScGetGuidForDoc
(f:\titanium\admin\src\libs\logic\security2.cxx:2092)
Error code 0XC0072038 (8248): The result set is too large.
[01:15:34] CAce::ScInit
(f:\titanium\admin\src\libs\logic\security2.cxx:1934)
Error code 0XC0072038 (8248): The result set is too large.
[01:15:40] Setting ACL on domain container
[01:15:53] CAce::ScInit
(f:\titanium\admin\src\libs\logic\security2.cxx:1979)
Error code 0XC0072038 (8248): The result set is too large.
[01:15:53] CAce::ScInitArray
(f:\titanium\admin\src\libs\logic\security2.cxx:2508)
Error code 0XC0072038 (8248): The result set is too large.
[01:15:53] CExSecurityDescriptor::ScAddAces
(f:\titanium\admin\src\libs\logic\security2.cxx:4461)
Error code 0XC0072038 (8248): The result set is too large.
[01:15:53] CExSecurityDescriptor::ScAddAcesToDob
(f:\titanium\admin\src\libs\logic\security2.cxx:4492)
Error code 0XC0072038 (8248): The result set is too large.
[01:15:53] === IGNORING PREVIOUS ERRORS === ScSetPermissionsOnDomain
while adding rights for inetOrgPerson. RUS may not be able to update
inetOrgPerson objects.
(f:\titanium\admin\src\libs\exsetup\dsmisc.cxx:655)
The operation has completed successfully.
[01:15:53] Setting ACL on proxy container
[01:15:57] Setting ACL on AdminSDHolder container
[01:16:01] Allowing Exchange Enterprise Servers to read SACLs in this
domain
[01:16:01] Leaving ScSetPermissionsOnDomain
[01:16:01] Entering ScSetPermissionsOnExchangeServerGroups
[01:16:01] Reading list of full admins from org
[01:16:01] Entering ScGetListOfOrgLevelFullAdmins
[01:16:01] Creating DOB for Org object
[01:16:01] Reading datMSEXCH_ADMINS array
[01:16:01] Looking for full admins
[01:16:01] Adding account S-1-5-21-1547161642-706699826-1343024091-500
to full admin list
[01:16:01] Leaving ScGetListOfOrgLevelFullAdmins
[01:16:01] Initializing CTrustee from SID
S-1-5-21-1547161642-706699826-1343024091-500
[01:16:02] Granting DS_AM_FULL_CONTROL on groups to
domain\administrator
[01:16:02] Granting Enterprise Servers group FULL CONTROL of both
groups
[01:16:02] Adding ACEs to Enterprise Servers DOB
[01:16:08] Adding ACEs to Domain Servers DOB
[01:16:11] Leaving ScSetPermissionsOnExchangeServerGroups
[01:16:11] Entering ScAddEDSAndSetPermissionsOnPreW2KCompatGroup
[01:16:11] Adding EDS group to Pre-W2K group
[01:16:12] Granting EES group permissions on Pre-W2K group
[01:16:13] Executing LDAP search "(sAMAccountName=Pre-Windows 2000
Compatible Access)"
[01:16:13] Writing permissions on object
"/dc=org/dc=domain/cn=Builtin/cn=Pre-Windows 2000 Compatible Access"
[01:16:19] Leaving ScAddEDSAndSetPermissionsOnPreW2KCompatGroup
[01:16:19] Entering ScSetPasswordOnSystemMailboxAccounts
[01:16:19] Searching for System Mailbox accounts
[01:16:19] Setting password on object "/dc=org/dc=domain/cn=Microsoft
Exchange System
Objects/cn=SystemMailbox{453F057E-6A76-4066-BC37-AC63EF9EE936}"...
[01:16:19] Getting IADsUser interface for
"LDAP://ss1.domain.org:389/cn=SystemMailbox{453F057E-6A76-4066-BC37-AC63EF9EE936},cn=Microsoft
Exchange System Objects,dc=domain,dc=org"
[01:16:19] Generating random password
[01:16:19] Setting password on account
[01:16:19] ScSetPasswordOnSystemMailboxAccounts
(f:\titanium\admin\src\libs\exsetup\dsmisc.cxx:1146)
Error code 0X80070035 (53): The network path was not found.
[01:16:19] Leaving ScSetPasswordOnSystemMailboxAccounts
[01:16:19] CAtomPermissions::ScAddDSObjects
(f:\titanium\admin\src\udog\exsetdata\components\domprep\a_permissions.cxx:150)
Error code 0X80070035 (53): The network path was not found.
[01:16:19] Leaving CAtomPermissions::ScAddDSObjects
[01:16:19] mode = 'DomainPrep' (61966) CBaseAtom::ScSetup
(f:\titanium\admin\src\udog\setupbase\basecomp\baseatom.cxx:842)
Error code 0X80070035 (53): The network path was not found.
[01:18:34] >>>>>>>>>> Setup encountered a fatal error during Microsoft
Exchange Domain Preparation of DomainPrep component task. -- ID:62237
-- CBaseComponent::ScSetup
(f:\titanium\admin\src\udog\setupbase\basecomp\basecomp.cxx:1401)
Error code 0X80070035 (53): The network path was not found.
[01:18:34] Entering ScQueueWatsonErrorReport
[01:19:05] Leaving ScQueueWatsonErrorReport
[01:19:05] Entering
CBaseComponent::SetSubtreeComponentsToFailWithErrorInSetup
[01:19:05] Leaving
CBaseComponent::SetSubtreeComponentsToFailWithErrorInSetup
[01:19:05] CBaseComponent::ScSetup
(f:\titanium\admin\src\udog\setupbase\basecomp\basecomp.cxx:1487)
Error code 0X80070035 (53): The network path was not found.
[01:19:05] Leaving CBaseComponent::ScSetup
[01:19:05] CCompDomainPrep::ScSetup
(f:\titanium\admin\src\udog\exsetdata\components\domprep\compdomprep.cxx:519)
Error code 0X80070035 (53): The network path was not found.
[01:19:05] Leaving CCompDomainPrep::ScSetup
[01:19:05] CComExchSetupComponent::Install
(f:\titanium\admin\src\udog\bo\comboifaces.cxx:829)
Error code 0X80070035 (53): The network path was not found.
[01:19:05] Entering ScQueueWatsonErrorReport
Environment details: Exchange Server 2003 in Native mode (upgraded from
5.5 -> 2000 -> 2003) running on Windows 2000 Server SP4 with all recent
patches via Windows Update. Single forest/domain and DNS on a single
Windows 2000 server SP4 with all recent patches via Windows Update.
Any suggested guidance is much appreciated. Thank you, Maurice
|
|
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in