| Author |
Message |
Gaylen Michael
Guest
|
 Posted:
Sat Dec 24, 2005 1:58 am Post subject:
Cannot get outbound mail working |
|
|
Hello,
I've spun my wheels for a week now trying to get this to work with no luck.
There are only 3 servers in this network; one is the 2003 SP1 AD domain
controller also running DNS/WINS/DHCP while the other is the ISA 2004 SP1
firewall and the last one is the Exchange 2003 SP2 running in native mode.
I have inbound mail working just fine, but I cannot seem to get outbound
mail working for the life of me. I have an MX record created thru network
solutions referencing our static public ip address. I have setup the mail
publishing rule in ISA for Exchange and I am able to telnet into the SMTP
port on the Exchange server. I have run the SMTPDiag tool and it fails when
checking the MX servers for the receiving email address, in this case my
hotmail account. Here's the error the SMTPDiag tool provides, and I've
tried to send to many many other valid smtp email addresses.
Connecting to the server failed. Error: 10051
Failed to submit mail to mx4.hotmail.com.
Anyone help on this one?
Thx,
Gaylen
|
|
| Back to top |
|
 |
Jonathan Norris
Guest
|
| Posted:
Sat Dec 24, 2005 5:58 pm Post subject:
RE: Cannot get outbound mail working |
|
|
Does it just hang in the Queue on the Exchange Server or does it leave the
Exchange server and get bounced back?
Can you describe your Network a little more? Are you sending directly to
the internet or are you using a gateway for outbound mail?
--
Jonathan
No Warrenties Implied, Did you do a FULL backup today??????
"Gaylen Michael" wrote:
| Quote: | Hello,
I've spun my wheels for a week now trying to get this to work with no luck.
There are only 3 servers in this network; one is the 2003 SP1 AD domain
controller also running DNS/WINS/DHCP while the other is the ISA 2004 SP1
firewall and the last one is the Exchange 2003 SP2 running in native mode.
I have inbound mail working just fine, but I cannot seem to get outbound
mail working for the life of me. I have an MX record created thru network
solutions referencing our static public ip address. I have setup the mail
publishing rule in ISA for Exchange and I am able to telnet into the SMTP
port on the Exchange server. I have run the SMTPDiag tool and it fails when
checking the MX servers for the receiving email address, in this case my
hotmail account. Here's the error the SMTPDiag tool provides, and I've
tried to send to many many other valid smtp email addresses.
Connecting to the server failed. Error: 10051
Failed to submit mail to mx4.hotmail.com.
Anyone help on this one?
Thx,
Gaylen
|
|
|
| Back to top |
|
|
Gaylen Michael
Guest
|
| Posted:
Mon Dec 26, 2005 9:36 am Post subject:
Re: Cannot get outbound mail working |
|
|
Hi Jonathan,
The messages hang in the queue on the server until it fails after about a
day of retries.
Our network is setup with an ISA 2004 server with 2 NICs, one with the
public ip address and the other is the internal ip address. That internal
ip address is the gateway / router ip address used in my DHCP scope for our
network. I do not have a SMTP service running on that server. In fact the
only SMTP server on the network right now is the Exchange 2003 SP2 server,
which is running as a SecureNAT client on the network along with the other
servers on the network.
So, the Exchange server is setup to route mail directly using DNS and
configured with our ISPs DNS servers. There is no SMARTHOST configured to
forward the SMTP traffic.
Thx,
Gaylen
"Jonathan Norris" <JonathanNorris@discussions.microsoft.com> wrote in
message news:0BF3EB53-5366-4B73-BADA-83BD65113345@microsoft.com...
| Quote: | Does it just hang in the Queue on the Exchange Server or does it leave the
Exchange server and get bounced back?
Can you describe your Network a little more? Are you sending directly to
the internet or are you using a gateway for outbound mail?
--
Jonathan
No Warrenties Implied, Did you do a FULL backup today??????
"Gaylen Michael" wrote:
Hello,
I've spun my wheels for a week now trying to get this to work with no
luck.
There are only 3 servers in this network; one is the 2003 SP1 AD domain
controller also running DNS/WINS/DHCP while the other is the ISA 2004 SP1
firewall and the last one is the Exchange 2003 SP2 running in native
mode.
I have inbound mail working just fine, but I cannot seem to get outbound
mail working for the life of me. I have an MX record created thru
network
solutions referencing our static public ip address. I have setup the
mail
publishing rule in ISA for Exchange and I am able to telnet into the SMTP
port on the Exchange server. I have run the SMTPDiag tool and it fails
when
checking the MX servers for the receiving email address, in this case my
hotmail account. Here's the error the SMTPDiag tool provides, and I've
tried to send to many many other valid smtp email addresses.
Connecting to the server failed. Error: 10051
Failed to submit mail to mx4.hotmail.com.
Anyone help on this one?
Thx,
Gaylen
|
|
|
| Back to top |
|
|
Pierrot Robert
Guest
|
| Posted:
Tue Dec 27, 2005 5:58 pm Post subject:
Re: Cannot get outbound mail working |
|
|
Try this:
1- On the Exchange server open a command prompt
2- type "nslookup"
3- type "set type=mx"
4- type "hotmail.com"
What is the result ?
Gaylen Michael wrote:
| Quote: | Hi Jonathan,
The messages hang in the queue on the server until it fails after
about a day of retries.
Our network is setup with an ISA 2004 server with 2 NICs, one with the
public ip address and the other is the internal ip address. That
internal ip address is the gateway / router ip address used in my
DHCP scope for our network. I do not have a SMTP service running on
that server. In fact the only SMTP server on the network right now
is the Exchange 2003 SP2 server, which is running as a SecureNAT
client on the network along with the other servers on the network.
So, the Exchange server is setup to route mail directly using DNS and
configured with our ISPs DNS servers. There is no SMARTHOST
configured to forward the SMTP traffic.
Thx,
Gaylen
"Jonathan Norris" <JonathanNorris@discussions.microsoft.com> wrote in
message news:0BF3EB53-5366-4B73-BADA-83BD65113345@microsoft.com...
Does it just hang in the Queue on the Exchange Server or does it
leave the Exchange server and get bounced back?
Can you describe your Network a little more? Are you sending
directly to the internet or are you using a gateway for outbound
mail? --
Jonathan
No Warrenties Implied, Did you do a FULL backup today??????
"Gaylen Michael" wrote:
Hello,
I've spun my wheels for a week now trying to get this to work with
no luck.
There are only 3 servers in this network; one is the 2003 SP1 AD
domain controller also running DNS/WINS/DHCP while the other is the
ISA 2004 SP1 firewall and the last one is the Exchange 2003 SP2
running in native mode.
I have inbound mail working just fine, but I cannot seem to get
outbound mail working for the life of me. I have an MX record
created thru network
solutions referencing our static public ip address. I have setup
the mail
publishing rule in ISA for Exchange and I am able to telnet into
the SMTP port on the Exchange server. I have run the SMTPDiag tool
and it fails when
checking the MX servers for the receiving email address, in this
case my hotmail account. Here's the error the SMTPDiag tool
provides, and I've tried to send to many many other valid smtp
email addresses. Connecting to the server failed. Error: 10051
Failed to submit mail to mx4.hotmail.com.
Anyone help on this one?
Thx,
Gaylen |
|
|
| Back to top |
|
|
Gaylen Michael
Guest
|
| Posted:
Wed Dec 28, 2005 1:37 am Post subject:
Re: Cannot get outbound mail working |
|
|
Everything looks to be in order after running your list of commands from the
Exchange server. Any known issues w/ ISA 2004 SP1 and Exchange SP2?
Here's the output from the screen you asked for...
| Quote: | set type=mx
hotmail.com
Server: UnKnown |
Address: 10.10.10.100
Non-authoritative answer:
hotmail.com MX preference = 5, mail exchanger = mx4.hotmail.com
hotmail.com MX preference = 5, mail exchanger = mx1.hotmail.com
hotmail.com MX preference = 5, mail exchanger = mx2.hotmail.com
hotmail.com MX preference = 5, mail exchanger = mx3.hotmail.com
hotmail.com nameserver = ns5.msft.net
hotmail.com nameserver = ns1.msft.net
hotmail.com nameserver = ns2.msft.net
hotmail.com nameserver = ns3.msft.net
hotmail.com nameserver = ns4.msft.net
mx1.hotmail.com internet address = 64.4.50.50
mx1.hotmail.com internet address = 65.54.244.8
mx1.hotmail.com internet address = 65.54.244.136
mx1.hotmail.com internet address = 65.54.245.8
mx2.hotmail.com internet address = 65.54.190.50
mx2.hotmail.com internet address = 65.54.244.40
mx2.hotmail.com internet address = 65.54.244.168
mx2.hotmail.com internet address = 65.54.245.40
mx3.hotmail.com internet address = 65.54.245.72
mx3.hotmail.com internet address = 64.4.50.179
mx3.hotmail.com internet address = 65.54.244.72
mx3.hotmail.com internet address = 65.54.244.200
mx4.hotmail.com internet address = 65.54.244.232
mx4.hotmail.com internet address = 65.54.245.104
mx4.hotmail.com internet address = 65.54.190.179
mx4.hotmail.com internet address = 65.54.244.104
ns1.msft.net internet address = 207.46.245.230
ns2.msft.net internet address = 64.4.25.30
ns3.msft.net internet address = 213.199.144.151
"Pierrot Robert" <mcthepro_at_hotmail.com> wrote in message
news:ePx$uMvCGHA.4016@TK2MSFTNGP11.phx.gbl...
| Quote: | Try this:
1- On the Exchange server open a command prompt
2- type "nslookup"
3- type "set type=mx"
4- type "hotmail.com"
What is the result ?
Gaylen Michael wrote:
Hi Jonathan,
The messages hang in the queue on the server until it fails after
about a day of retries.
Our network is setup with an ISA 2004 server with 2 NICs, one with the
public ip address and the other is the internal ip address. That
internal ip address is the gateway / router ip address used in my
DHCP scope for our network. I do not have a SMTP service running on
that server. In fact the only SMTP server on the network right now
is the Exchange 2003 SP2 server, which is running as a SecureNAT
client on the network along with the other servers on the network.
So, the Exchange server is setup to route mail directly using DNS and
configured with our ISPs DNS servers. There is no SMARTHOST
configured to forward the SMTP traffic.
Thx,
Gaylen
"Jonathan Norris" <JonathanNorris@discussions.microsoft.com> wrote in
message news:0BF3EB53-5366-4B73-BADA-83BD65113345@microsoft.com...
Does it just hang in the Queue on the Exchange Server or does it
leave the Exchange server and get bounced back?
Can you describe your Network a little more? Are you sending
directly to the internet or are you using a gateway for outbound
mail? --
Jonathan
No Warrenties Implied, Did you do a FULL backup today??????
"Gaylen Michael" wrote:
Hello,
I've spun my wheels for a week now trying to get this to work with
no luck.
There are only 3 servers in this network; one is the 2003 SP1 AD
domain controller also running DNS/WINS/DHCP while the other is the
ISA 2004 SP1 firewall and the last one is the Exchange 2003 SP2
running in native mode.
I have inbound mail working just fine, but I cannot seem to get
outbound mail working for the life of me. I have an MX record
created thru network
solutions referencing our static public ip address. I have setup
the mail
publishing rule in ISA for Exchange and I am able to telnet into
the SMTP port on the Exchange server. I have run the SMTPDiag tool
and it fails when
checking the MX servers for the receiving email address, in this
case my hotmail account. Here's the error the SMTPDiag tool
provides, and I've tried to send to many many other valid smtp
email addresses. Connecting to the server failed. Error: 10051
Failed to submit mail to mx4.hotmail.com.
Anyone help on this one?
Thx,
Gaylen
|
|
|
| Back to top |
|
|
Gaylen Michael
Guest
|
| Posted:
Thu Dec 29, 2005 1:58 am Post subject:
Re: Cannot get outbound mail working |
|
|
Also you may be interested in knowing our internal DNS scheme is following
the .local domain name extension rather than .com. So, our our servers
fqdn's are servername.companyname.local. I'm not sure if that has something
to do w/ this problem or not but I'm starting to wonder.
"Gaylen Michael" <gaylenmichael(spamarama)@hotmail.com> wrote in message
news:%23bPaG0xCGHA.2436@TK2MSFTNGP15.phx.gbl...
| Quote: | Everything looks to be in order after running your list of commands from
the Exchange server. Any known issues w/ ISA 2004 SP1 and Exchange SP2?
Here's the output from the screen you asked for...
set type=mx
hotmail.com
Server: UnKnown
Address: 10.10.10.100
Non-authoritative answer:
hotmail.com MX preference = 5, mail exchanger = mx4.hotmail.com
hotmail.com MX preference = 5, mail exchanger = mx1.hotmail.com
hotmail.com MX preference = 5, mail exchanger = mx2.hotmail.com
hotmail.com MX preference = 5, mail exchanger = mx3.hotmail.com
hotmail.com nameserver = ns5.msft.net
hotmail.com nameserver = ns1.msft.net
hotmail.com nameserver = ns2.msft.net
hotmail.com nameserver = ns3.msft.net
hotmail.com nameserver = ns4.msft.net
mx1.hotmail.com internet address = 64.4.50.50
mx1.hotmail.com internet address = 65.54.244.8
mx1.hotmail.com internet address = 65.54.244.136
mx1.hotmail.com internet address = 65.54.245.8
mx2.hotmail.com internet address = 65.54.190.50
mx2.hotmail.com internet address = 65.54.244.40
mx2.hotmail.com internet address = 65.54.244.168
mx2.hotmail.com internet address = 65.54.245.40
mx3.hotmail.com internet address = 65.54.245.72
mx3.hotmail.com internet address = 64.4.50.179
mx3.hotmail.com internet address = 65.54.244.72
mx3.hotmail.com internet address = 65.54.244.200
mx4.hotmail.com internet address = 65.54.244.232
mx4.hotmail.com internet address = 65.54.245.104
mx4.hotmail.com internet address = 65.54.190.179
mx4.hotmail.com internet address = 65.54.244.104
ns1.msft.net internet address = 207.46.245.230
ns2.msft.net internet address = 64.4.25.30
ns3.msft.net internet address = 213.199.144.151
"Pierrot Robert" <mcthepro_at_hotmail.com> wrote in message
news:ePx$uMvCGHA.4016@TK2MSFTNGP11.phx.gbl...
Try this:
1- On the Exchange server open a command prompt
2- type "nslookup"
3- type "set type=mx"
4- type "hotmail.com"
What is the result ?
Gaylen Michael wrote:
Hi Jonathan,
The messages hang in the queue on the server until it fails after
about a day of retries.
Our network is setup with an ISA 2004 server with 2 NICs, one with the
public ip address and the other is the internal ip address. That
internal ip address is the gateway / router ip address used in my
DHCP scope for our network. I do not have a SMTP service running on
that server. In fact the only SMTP server on the network right now
is the Exchange 2003 SP2 server, which is running as a SecureNAT
client on the network along with the other servers on the network.
So, the Exchange server is setup to route mail directly using DNS and
configured with our ISPs DNS servers. There is no SMARTHOST
configured to forward the SMTP traffic.
Thx,
Gaylen
"Jonathan Norris" <JonathanNorris@discussions.microsoft.com> wrote in
message news:0BF3EB53-5366-4B73-BADA-83BD65113345@microsoft.com...
Does it just hang in the Queue on the Exchange Server or does it
leave the Exchange server and get bounced back?
Can you describe your Network a little more? Are you sending
directly to the internet or are you using a gateway for outbound
mail? --
Jonathan
No Warrenties Implied, Did you do a FULL backup today??????
"Gaylen Michael" wrote:
Hello,
I've spun my wheels for a week now trying to get this to work with
no luck.
There are only 3 servers in this network; one is the 2003 SP1 AD
domain controller also running DNS/WINS/DHCP while the other is the
ISA 2004 SP1 firewall and the last one is the Exchange 2003 SP2
running in native mode.
I have inbound mail working just fine, but I cannot seem to get
outbound mail working for the life of me. I have an MX record
created thru network
solutions referencing our static public ip address. I have setup
the mail
publishing rule in ISA for Exchange and I am able to telnet into
the SMTP port on the Exchange server. I have run the SMTPDiag tool
and it fails when
checking the MX servers for the receiving email address, in this
case my hotmail account. Here's the error the SMTPDiag tool
provides, and I've tried to send to many many other valid smtp
email addresses. Connecting to the server failed. Error: 10051
Failed to submit mail to mx4.hotmail.com.
Anyone help on this one?
Thx,
Gaylen
|
|
|
| Back to top |
|
|
|
|
|
|
FAQ
Memberlist
Register
Profile
Log in to check your private messages
Log in